Pella Multi-Point Latch Assembly

Lock Removal:
There are 4 spring-loaded tabs that hold the Mortise lock in the storm door, even when face plate screws are removed.
Use a small pry bar or stiff putty knife and the spring-loaded tabs will retract when removing lock body
Put a piece of cardboard between screwdriver and door to prevent marring or chipping paint

Cylinder Removal:
The cylinder screw needs to be removed to take the keyed cylinder out of the door.
The cylinder has a cam in the center that rotates to lock and unlock the door
The cylinder only comes out when the cam is in the proper position.
To Remove cylinder turn thumb turn slowly and pull, when the cam is in alignment the cylinder will come out.
Replacement cylinder must be made by Pella. Their cylinder knob/key turns 270 degrees before the cam starts to turn.

Previous Sku:

• 8710433
• 8710481
• 8710480
• 8710430
• 8710435
• 8710483
• 8710488
• 8710486